Single girder Overhead crane
- LD Model Motor-driven Single Beam Crane
E: LD model singel beam motor crane is improved and designed on the basis of LD model. It is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1, MD1 MC1 model electric hoist as a complete set, it is light duty crane with a capacity of 1 to 30 tons. The span is 7.5-31m. Working grade is A3-A5. Working temperature is -250C to 400C
This product has two operational methods, ground or operational room which has open model and closed model and can be installed on left or right side according to the practical situation. And the direction of entering the gate has wo forms, sideway and ends in order to satisfy the users’ choice under different conditions.
- LDY Model Motor-driven Single Beam Crane
LDY single girder crane for metallurgy is mainly used for lifting molten metal and foundry location. Its configured lifting mechanism is model YH11 electric hoist for metallurgy, hoisting capacity <=10T. Main girder bottom of crane adopts to special heat insulation disposal. Working environment temperature is -100C to 400C, relative humidity is <=50% in 40, design and manufacture of crane meet the requirements of AQSIQ Doc# (2007) 375. The requirements of AQSIQ Doc# (2007) 375. Other situations that lift fusion non-metallic material or hot solid meatl can refer.
- LDP MODEL MOTOR-DRIVEN SINGLE BEAM CRANE
LDP model motor-driven single beam crane belongs to very low clearance light duty lifting equipment. Electric hoist is at one side of main girder, so can increase service space of hook and reduce the cost. With advantages of big trolley tread, smooth traveling, tight structure, strong rigidity, delicate operation, low noise, safety and reliability and beautiful exterior, it is widely used in the situation that clearance height of workshop is low and the operating ambient temperature is -250C to 400C.
LDP model motor-driven single beam crane is designed and produced according to GB/T 3811-2008, JB/T 1306-2008 standard and used with model CD1, MD1. It is a light duty crane with rated load of 3 to 30 tons. The span is 7.5 – 22.5 meters. Working grade is A3-A4 and lifting height is 6 – 12 meters. The ,ain operating methods is ground control (ground control, remote control, ground control+remote control). If the span and lifting height is out of the range that stylebook lists, we can do non-standard design according to user requirement.